Installing vinyl film on top of a riveted surface can be a challenge as air gets trapped in between. The stiff bristle Rivet Brush helps remove the trapped air and lay the film flat against the substrate, helping to ensure a headache-free installation.
To use, remove any trapped air with an air release tool and finish by using the Rivet Brush in a circular motion to lay the film flat around the rivet. It’s a time saver as compared to a traditional hard card.
|Who Measured the Durometer?||EPD|
You May Also Like
Frequently Bought Together
Sample RequestSample Requests
Categories3M Fasara Glass Finishes3M Dusted/Frosted Crystal Glass Finishes3M Blockout & Electrocut3M Dichroic Glass Finishes3M DI-NOC Architectural Finishes3M Flex Write Surface3M Ceramic Coating3M Wrap Film Series 2080Bird DivertInstallation ToolsApparelBladesCleaning & PreparationHandlesHard Cards (Plastic, Teflon & Bondo)Installation SolutionsInstaller Tool KitsKnivesMeasuring & MeteringMiscellaneousPlotters & AccessoriesReach ToolsScrapersSprayersSqueegees (Plastic, Rubber, Channel, Tube & Felt)Tapes & StickersVinyl Specialty Tools