Class Description: EPD offers a one (1) day hands-on installation training course for learning the basic techniques to apply 3M Wrap Film Series 2080. The material for training is supplied and the course includes the following: basic vinyl wrap film knowledge; overview of installation tools, heat shrinking on various surfaces; and installation on hood, rear quarter panels, doors and mirrors.

Class Brochure: Download Brochure (PDF)

Training Fee: $695.00 / person (includes installation tools and lunch)

Class Description: EPD offers a two (2) day hands-on installation training course for the trainee to learn the most exacting standards and best practices for protecting vehicle surfaces from chips, scratches, and weathering through the installation of 3M Paint Protection Film. You will leave with a Certificate of Completion. When you have mastered your installation techniques after some practice, you can take the next step to further your accreditation by successfully passing an installation test within twelve (12) months of your original training. Once you have passed the test, you will receive the title of 3M Paint Protection Film Preferred Installer.

Class Brochure: Download Brochure (PDF)

Training Fee: $1,395.00/person (Includes installation tools and lunch each day)

Class Description: EPD offers a one (1) day hands-on installation training course designed to expose the trainee to the basics of paint correction and ceramic coating application.

Paint correction is usually a pre-requisite for ceramic coating application and refers to the restoration and removal of flaws (swirl marks, scratches, etc) from a car’s paint. We will demonstrate a two-stage correction process using a dual action machine. (Although paint correction can be taken to extreme levels, this class will help prepare you to repair mildly damaged paint to the point where 3M Ceramic Coating can be applied.)

After completing paint correction training, we will review ceramic coating application. We will cover vehicle preparation, tools, and application procedures for paint, plastics, and windshields. Comprehensive details regarding material composition and warranty will also be covered.

Class Brochure: Download Brochure (PDF)

Training Fee: $795.00/person (Includes start-up kit and lunch)

Class Description: EPD offers a one (1) day hands-on installation training course for installers who have already completed basic training and who have significant experience installing professionally. The focus will be bulk roll installation on hoods, bumpers, and other common body panels. Techniques for stretching, wrapping, and trimming will be covered.

Class Brochure: Download Brochure (PDF)

Training Fee: $595.00/person (includes lunch)

Class Description: EPD offers a two (2) day hands-on installation training course for learning to apply automotive window film. The course includes the following: basic window film knowledge; overview of installation tools; how to cut film; how to heat shrink; how to squeegee; and how to remove film. This training is designed for the trainee who does not want to align himself/herself with any one particular manufacturer.

Class Brochure: Download Brochure (PDF)

Training Fee: $1,295.00/person (Includes installation tools and lunch each day)

Class Description: EPD offers a one (1) day hands-on installation training course designed to expose the trainee to the basics of insulating window film installation on residential and commercial windows. By no means will you leave an expert, but you should leave with the skillset necessary to practice – and practice makes perfect. (Note: This is not factory certification training. Taking the course does not imply that EPD will sell the trainee or his/her employer material. EPD is only teaching the trainee how to install sun control window film. It is up to the trainee or his/her employer to source material beyond the initial training.)

Class Brochure: Download Brochure (PDF)

Training Fee: $795.00 / person (includes installation tools and lunch)

Class Description: EPD offers a one (1) day hands-on installation training course designed to expose the trainee to the basics of decorative window film installation on residential and commercial windows. By no means will you leave an expert, but you should leave with the skill-set necessary to practice – and practice makes perfect. (Note: This is not factory certification training.)

Class Brochure: Download Brochure (PDF)

Training Fee: $795.00/person (Includes installation tools and lunch)

Class Description: EPD offers a one (1) day hands-on installation training course for learning the basic techniques to apply 3M Wrap Film Series 2080. The material for training is supplied and the course includes the following: basic vinyl wrap film knowledge; overview of installation tools, heat shrinking on various surfaces; and installation on hood, rear quarter panels, doors and mirrors.

Class Brochure: Download Brochure (PDF)

Training Fee: $695.00 / person (includes installation tools and lunch)

Class Description: EPD offers a two (2) day hands-on installation training course for the trainee to learn the most exacting standards and best practices for protecting vehicle surfaces from chips, scratches, and weathering through the installation of 3M Paint Protection Film. You will leave with a Certificate of Completion. When you have mastered your installation techniques after some practice, you can take the next step to further your accreditation by successfully passing an installation test within twelve (12) months of your original training. Once you have passed the test, you will receive the title of 3M Paint Protection Film Preferred Installer.

Class Brochure: Download Brochure (PDF)

Training Fee: $1,395.00/person (Includes installation tools and lunch each day)

Class Description: EPD offers a two (2) day hands-on installation training course for learning to apply automotive window film. The course includes the following: basic window film knowledge; overview of installation tools; how to cut film; how to heat shrink; how to squeegee; and how to remove film. This training is designed for the trainee who does not want to align himself/herself with any one particular manufacturer.

Class Brochure: Download Brochure (PDF)

Training Fee: $1,295.00/person (Includes installation tools and lunch each day)

EPD offers a one (1) day hands-on installation training course designed to expose the trainee to the basics of security window film installation on residential and commercial windows. You will also learn how to install window film attachment systems. By no means will you leave an expert, but you should leave with the skillset necessary to practice – and practice makes perfect. (Note: This is not factory certification training. Taking the course does not imply that EPD will sell the trainee or his/her employer material. EPD is only teaching the trainee how to install security window film. It is up to the trainee or his/her employer to source material beyond the initial training.)

Training Fee: $995.00 / person (includes installation tools and lunch)

Class Description: The 3M DI-NOC Architectural Finishes Preferred Installer Program is comprised of two elements: a two day training course and a one day testing session.

Days 1 & 2: Training: We will cover the skills and knowledge necessary to apply DI-NOC architectural films in an interior design setting. Completion of the training will allow participants to complete DI-NOC applications using appropriate materials, tools and techniques. Applications include, but are not limited to, flat surfaces, door wrapping, complex curves, corners and more. In addition to application techniques, other training topics include surface preparation, installation considerations, and maintenance and repair recommendations.

Day 3: Testing: Successful completion of this test earns participants 3M’s DI-NOC Architectural Finishes Preferred Installer designation. This one-day test is comprised of 8 different application stations that participants are required to successfully complete. Application techniques tested are taught during the training session. Participation in the training and testing does not guarantee earning the 3M DI-NOC Architectural Finishes Preferred Installer designation.

Class Brochure: Download Brochure (PDF)

Training Fee: $1,200.00/person (includes installation tools and lunch each day)

The above training is subject to factory necessity.

Class dates and times are subject to change or cancellation.